Corner posts are shared between runs, and a closed loop shares its first and last post.
How the fence calculator works
FenceCalc splits each run into sections no longer than the post spacing, rounding up. Posts are the sections plus one, minus one for each corner shared by two runs, plus one extra post per gate. Rails are sections × rails per section. Pickets are the fence length minus the gate openings, in inches, divided by picket width plus gap, rounded up.
Concrete per hole is the hole's volume minus the post's, from the top of a 6-inch gravel base (if you include one) to ground level, divided by the bag yield and rounded up to whole bags.
Typical wood fence specs
| Fence | Posts | Rails | Pickets |
|---|---|---|---|
| 4 ft picket fence | 4×4, 6 ft long, 6–8 ft apart | 2 per section | 1×4, 2–3″ gaps |
| 6 ft privacy fence | 4×4, 8 ft long, 8 ft apart | 3 per section | 1×6, no gap |
| Gate posts | 4×4 or 6×6, set deeper | — | — |
Concrete bag yields
| Bag | Yield |
|---|---|
| 40 lb | 0.30 ft³ |
| 50 lb | 0.375 ft³ |
| 60 lb | 0.45 ft³ |
| 80 lb | 0.60 ft³ |
Yields are the published figures for Quikrete fast-setting and standard concrete mixes. Results are estimates: buy a few spare pickets and a spare bag, and check local codes, frost depth, HOA rules and underground utilities (call 811 in the US) before you dig.
Frequently asked questions
How many posts do I need for a 100 ft fence?
With 8 ft spacing, 13 sections and 14 posts, plus one extra post per gate.
How far apart should fence posts be?
Usually 6 to 8 feet for wood fences; 8 ft is the most common because rails come in 8 ft lengths.
How many rails per section?
Two for fences up to about 4–5 ft, three for 6 ft privacy fences.
Is FenceCalc free?
Yes, with no sign-up or ads.
Are my measurements saved?
Yes, in this browser only.